Besides delivering the best quality footage in the surveillance area, a security camera system should come with weatherproof capability.
This factor is among the BIG and FIRST necessities for any outdoor proposed devices.
Cameras outside expose under the heat during the day and cold at night. If it doesn’t reinforce the ability to withstand severe impacts, there is no way a system can stand long to serve you.
Do you see why using a weatherproof security camera is crucial for having a long-lasting system?
But there are more. Scroll down to catch up with the top reasons why you need a waterproof camera network.
Why using a weatherproof security camera is a bless?
We all know what surveillance cameras are and the security matter those devices offer.
But why it has to be weatherproof?
Admittedly, the ability to resist water is a plus to have. But water-repellant cameras can surprise you beyond that mere feature.
An outdoor security camera system with some degree of safeguarding against the tough weather can challenge the harsh exterior condition.
Rain is the foremost villain that wets the devices. It is inevitable for an outside camera to receive some splashes from the shower. In winter, snow can stack on the top of the cameras. Electric devices with a higher temperature can melt the ice and make water.
These drops on its random paths can weave into crevices and opening gaps to damage the whole camera. The consequence is, sometimes unpredictable. But obviously, you won’t be able to keep using the device.
If your camera can survive the liquid, you can leave it out worrying free about it in raining season, even the downpour in stormy weather.
Guarantee data quality
Weather always leaves humidity in the air. And humidity means liquid; it can form drops or fog on the lens that is interfering the quality of the transferred image.
Even if the non-proofing camera can make it through the rain, blurred footage can become weak evidence in disputes.
Spend to save
Many house-owners try to save a few bucks getting non-weatherproof cameras but they are not aware of investing in good hardware is more beneficial.
The cost of fixing or replacing a new gadget can be above the money you could have spent for a proofing device.
Not to mention you will have to send the broken camera, wait for it to get inspected, diagnosed, repaired then travel back to you. That doesn’t stop there; the hassle of reinstalling is waiting, too.
Protect electric wiring
It is quite obvious to know what happens when water meets electricity.
In the worse scenario, the short-circuited can influence the whole electric wired system and cut off the power supply, maybe in the middle of the night.
Also, the peril of combustion or firing is behind. We are sure you don’t want to risk installing such an “insecure” security system.
IP Rating for surveillance cameras
So, you get the idea of why using a waterproof security camera can make it more secure.
If you decide to shop for the water-repellent watching system, it is the IP rating for waterproof you need to pay attention.
Understand IP Rating
IP rating represents the level of a device’s ability to resist water. It presents in two digits. Some may contain an additional letter. The numbers express the solidity of the device when exposing to liquid.
Each in the two digits translates to different specs.
The first digit
This number infers the protection of the camera’s enclosure against hazardous impacts and foreign objects. Higher numbers mean more guarding.
Here is the translate:
0 – Zero protection
1 – Against objects of 50 mm or larger
2 – Against objects of 12.5 mm or larger
3 – Against objects of 2.5 mm or larger
4 – Against objects of 1 mm or larger
5 – Some dust protection
6 – Full dust protection
The most prevalent IP ratings are IP66, IP67, and IP68. That means they can endure the absolute dust condition.
The second digit
This is the unit that tells the level of protection against liquids, notably in water.
It ranges from 0 to 8. The efficiency accelerates with the number.
0 – Zero protection
1 – Stand in vertically dripping water
2 – Stand and tilt 15 degrees in dripping water
3 – Stand 60 degrees to spraying water
4 – Withstand splashes from any direction
5 – Stand in water from a nozzle
6 – Stand water from jets
7 – Can dive up to 1 meter*
8 – Can submerge beyond 1 meter*
* The measure is not powered under IP Rating.
Devices that have IP66, IP67, and IP68 can swim and stay in any depth from one to deeper.
The third digit
It is the tamper protection this spec refers to. This third element is optional and more unusual. Devices qualified for solid and liquid rating are not necessarily qualified for intrusion rating.
These following letters involve intrusion protection:
A – Back of hand
B – Finger (and lower)
C – Tool (and lower)
D – Wire (and lower)
And these represent additional protection:
H – High voltage endurance
M – Device can move during water test
S – Device can stand still during water test
W – Weather protection
It is a MUST to have a waterproof camera system
It is your choice though, but we never wish inconvenience to you.
Nonetheless, it makes sense to waterproof your distant-eye system since the choices are varied and getting more budget. There is nothing to concern to your wallet.
Also, not all advertised waterproof surveillance networks perform like in the hype. Follow our instruction to choose the best security cameras here.
Hope this post has cleared your wonder about waterproofing cameras. Stick with us for more helpful camera tips.